01772 251444 info@electropak.net
  • Brochure
Electropak
  • Home
  • Inspection & Quality Approvals
  • Our Services
    • Laser & Water Jet Cutting
    • Sheet Metal Fabrication
    • Paint & Powder Coating
    • Machining
    • Engraving
    • Busbars
      • Copper Busbars
      • Cuponal Busbars
      • Epoxy Powder Coated Busbar Insulation
        • Testing of Epoxy Coated Busbars
      • Insulated Busbar
  • Case Studies & Clients
    • Clients and Partners
    • Case Studies
      • BAE Systems
      • GA Pressure Radio Unit
      • Multi Ply Components
      • Busbars for Aerospace Test Set
      • Alstom
      • Blowout Coil – Rail Industry
  • Blog
  • Contact Us
Select Page
How Do We Use Epoxy Power Coating to Insulate Busbars?

How Do We Use Epoxy Power Coating to Insulate Busbars?

by Electropak LTD | Jan 14, 2021 | Aerospace, Company news, Engineering, Machining

Epoxy powder coating has great advantages when it comes to insulating busbars. It has many benefits over traditional sleeving and wrapping of busbars, especially when complex shapes are required. Traditionally, busbars have been wrapped in fibreglass tape or sleeved...
See the Fluidised Bed Powder Coating Process

See the Fluidised Bed Powder Coating Process

by Electropak LTD | Jun 14, 2020 | Company news, Engineering

We are delighted to announce that our fluidised bed powder coating process is now fully operational at our paint facility and initially we are offering Resicoat HGC20R insulating powder. With the fluidised bed process, we pre-heat the part to 200 degrees C and then...
Blowout coils – what are they?

Blowout coils – what are they?

by Electropak LTD | Feb 26, 2020 | Company news, Engineering, Machining, Rail

Electropak Ltd has invaluable experience designing and manufacturing blowout coils for the rail industry. A blowout coil is a safety device used to suppress electric arcs created in the air gap between contacts when switching high currents. Magnetic blowout coils...
Introduction of fluidised bed powder coating process

Introduction of fluidised bed powder coating process

by Electropak LTD | Jan 31, 2020 | Company news

As a company, we are constantly striving for new, innovative ways to improve our production processes. The latest process to be introduced is a fluidised bed for the insulated powder coating of busbars to complement our existing electrostatic spray facility. The...

Recent Posts

  • How Do We Use Epoxy Power Coating to Insulate Busbars?
  • Electropak Invests in a Brand New High Precision Electric Press Brake
  • From Lancashire to Liftoff: Manufacturing busbars for the Ariane 6 space rocket
  • Silver Soldering – What Is It?
  • Electropak LTD Appoints Two New Directors

Recent Comments

    Archives

    • January 2021
    • October 2020
    • September 2020
    • July 2020
    • June 2020
    • February 2020
    • January 2020
    • August 2019
    • July 2019
    • June 2019
    • April 2019
    • February 2019
    • December 2018
    • November 2018
    • August 2018
    • July 2018
    • June 2018
    • May 2018
    • March 2018
    • February 2018
    • January 2018
    • December 2017
    • November 2017
    • October 2017

    Categories

    • Aerospace
    • Company news
    • Engineering
    • Machining
    • Manufacturing
    • Rail

    Meta

    • Log in
    • Entries RSS
    • Comments RSS
    • WordPress.org
    • Brochure
    • Terms & Conditions
    • Contact Us

    Managed by Lunar Management | Powered by WordPress